an optimum angle.
2.2 Installation of Type II Camera
2.2.1 Ceiling/Wall Mounting without Gang Box
Steps:
Attach the drill template (supplied) to the place
where you want to fix the camera, and then drill the
screw holes and the cable hole in the ceiling/wall
according to the drill template.
Route the cables through the cable hole.
Secure the camera to the ceiling with the supplied
Screws.
P Screw
T Screw
R Screw
Tilt Position Range
[0°-180°]
Pan Position Range
[0°-360°]
Rotation Position Range
[0°-360°]
Figure 2-5 Fix the Camera to the Ceiling/Wall
6. Refer to step
5
of
to adjust the camera to get
1.
2.
3.
Figure 2-6 Fix the Camera to the Ceiling/Wall
4.
Connect the corresponding cables.
5.
Adjust the camera according to Figure 2-7 to get an
optimum angle.
1). Loosen the P screw to adjust the pan direction
[0°~360°]. Tighten the screw after completing
the adjustment.
2). Loosen the T screw to adjust the tilt direction
[0°~180°]. Tighten the screw after completing
the adjustment.
3). Loosen the R screw and rotate the camera
[0°~360°] to adjust the lens to the surveillance
angle. Tighten the screw after completing the
adjustment.
Figure 2-7 3-axis Adjustment
Available from A1 Security Cameras
www.a1securitycameras.com email: [email protected]
