8. TECHNICAL SPECIFICATIONS
37
INPUT Section
Output Section
DSP Section
Features
General Performance
General
Peak, 6dB Lo-Shelf, 12dB Lo-Shelf, 6dB Hi-Shelf, 12dB Lo-Shelf, Notch
-24 dB, -18 dB, -12 dB, -6 dB, CLIP relative to Clip point (+20 dBu)
-24 dB, -12 dB, -6 dB, LIMIT relative to limiter threshold setting, CLIP
Connectors
2 x COMBO
Nominal input sensitivity
0 dB (0.775 V)
Input Impedance
30 kOhm, electronically balanced
Maximum Input Level
+20 dBu
Input Gain
-30/+6 dB variable in 0.5 dB steps
Digital input
AES/EBU, XLR-F
Digital input sample rate
32 kHz ~ 48 kHz
Connectors
6 x XLR-M
Output Impedance
600 Ohms, electronically balanced
Nominal Output Level
0 dBu
Maximum Out put Level
+20 dBu
Output Gain
-30/+6 dB variable in 0.5 dB steps
A/D converters
20 bit
D/A converters
20 bit
Internal dynamics
40 bit
Sampling frequency
48 kHz
Configuration
2-WAY STEREO, 3-WAY STEREO, 2,3,4,5,6-WAY MONO
Crossover Filters Type
Bessel, Butter worth or Linkwitz- Riley
Crossover Filters Slope
6, 12, 18, 24, or 48 dB per octave
Delay Step
21 microseconds minimum
Max Delay time
2621 ms (inputs), 291 ms (outputs)
EQ filters
Up to 40 maximum (depending on the crossover slope)
EQ Gain
+/-15 dB, variable in 0.5 dB steps
EQ Bandwidth
0.05 to 3.00 octaves, variable in 0.05 steps
EQ freq.
15.6 Hz to 16 kHz
Dynamics
Digital limiter on all the output
+ 128 CARD PRESETS
Communications
9-pin RS232, XLR-F RS485 IN, XLR-F RS485 IN
Frequency Response
20 Hz - 20 kHz, 0.25 dB
Dynamic range
>117 dB 20 Hz to 20 kHz
>120 dB 20 Hz to 20 kHz on AES/EBU input
Channel Separation
>100 dB 20 Hz to 20 kHz
Distortion (THD)
0.05%, 20 Hz to 20 kHz
Input Meter
Output Metering
Memories
FACTORY PRESETS are 10 + 64 USER PRESETS
EQ Type
S/N Ratio
>110 dB 20 Hz to 20 kHz
,
Dimensions
Weight
Power supply
483
44
300 mm
3.8 Kg
see label on the unit
