5.1.2 Store & Naming PRESTE
Use this menu to create new PRESETS, i.e. to save all the current system settings.
To save a PRESET:
Press
. The
page appears, by means of which it is possible to edit the name of
the PRESET to be saved.
ENTER
PRESET Naming
The name of the start PRESET (i.e. of the PRESET currently loaded) is proposed as default. The cursor takes
up position on the first of the twelve character spaces available.
At this point:
If you decide to accept and confirm the name suggested, press
.
ENTER
If you want to abort
procedure (for example because you've chosen the wrong memory
area) and return to Store PRESET procedure, press
.
Naming
ESC
If you want to assign a new name to the PRESET you're storing:
- use the
and
keys to position the cursor on the required character
- use
to enter the alphanumeric value wanted
DIAL
- after finishing, press
.
ENTER
S t o r e
2
U
2 x 2 W
P r e s e t
+ 2 M A X
S t o r e
3
U
O p e
P r e s e t
r a H a l l
1
S t o r e
1
C
N
P r e s e t
0
1
O
C A R D
P r e s
m
n
i
2
N a
e t
2 W + 2 M A X
Note:
ENTER
PRESET
If you're in one of the 128 memory areas reserved for the Card and you remove the Multimedia Memory
Card before pressing
, nothing happens: the display remains unchanged and Store
procedure
remains unvaried.
Note:
Factory PRESET #3
In the example,
, named "2x3W" has been loaded: Its system configuration is Input A
signal assigned to outputs 1, 3 and 5; Input B signal assigned to outputs 2, 4 and 6.
Loading a PRESET, a PRESET Change command is also automatically sent to the serial ports and can be used
to automatically load a PRESET with the same number to any other MAXIDRIVE3.4+ units connected and enabled
(Refer to
menu-
submenu-
option).
UTILITY
Comm. Setup
PRESET Change RX
Use
to reach the memory area in which the PRESET is to be saved.
DIAL
Note:
Factory PRESET
Factory PRESETS
In this procedure, the
areas aren't available, since the
can not
be permanently remember that it is possible to load a Factory
, modified. Nevertheless save it in
PRESET
a
or
area, modify it as required and then store it again in the same
User PRESET
Card PRESET
User or
Card
area.
Note:
PRESETS
Memory Card
Scrolling through the memory areas, the display shows the number, type and name of the
contained in them; scrolling through the 128 Card memory areas without the Multimedia
, a warning appears on the display:
5. THE MENU MAP CONFIGURATION DESCRIPTION
9
