Ltl Acorn Ltl-5511 MG, Руководство пользователя, Страница: 8 / 42

- 6 -
QUICK START
2.1 Load Batteries
To install batteries on the camera (Part # Ltl-5511M ), please follow the instructions below.

Follow direction of arrow, push left slip switch, it will pop out.

Install 4 AA batteries. Make sure the polarity matches the sign on the cover.

Replace the cover.
To install the additional battery box (Part # Ltl-MM3), please refer to Appendix III: Instructions
For Installing Battery Box)
Alternatively the camera can run on an external 6V~12V DC power source (optional). When
both external power and batteries are connected, the camera will be powered by the external one
preferentially. Bundled with our external solar power supply (purchased separately), the camera
could work in the field over one year without changing batteries.
When battery level gets low, in the TEST mode, the message “Low Battery” would be shown on
the TFT LCD screen.
The MMS wireless camera will automatically send a “Low battery” text alert to your cell phone.
Meanwhile, the battery level would be shown as Code
B1/B2/B3
on the received MMS pictures.
B3
means high level and
B1
indicates the level is low and you may need to change the batteries
soon.
2.2 Insert SD Card
The camera does not come with internal memory. It will not work without a SD (Secure Digital)
memory card or SDHC (High Capacity) card. Before inserting the SD card, please make sure the
write-protect switch is on “OFF” side (NOT in the “LOCK” position). The supported memory
capacity is up to 16GB. If you use a SD card which capacity is larger than 16GB, please make
sure that you test it in advance.
LTL
ACORN
®