Ltl Acorn Ltl-5511 MG, Руководство пользователя, Страница: 27 / 42

- 25 -
and search for text
message
commands.
60
Whether or not the camera takes a picture and
sends it back to you once text commands are
received: Off (0), On (1)
This code works under CAMERA, VIDEO and
VIDEO Mode.
60*1#
Camera takes a
picture and sends
it back upon
command.
Note
: Order 12 and13 are ineffective in SMTP mode.
3.7 View Local MPNO Name and Signal Strength on TFT LCD Screen
You can find your local Mobile Phone Network Operator’s name and the signal strength on the
TFT LCD screen on the camera, just like you can see the reception on a regular cell phone.
Install the SIM card and 12 AA batteries. Switch to the TEST position. Or connect the camera to
a TV with the provided AV cable if needed. Wait for up to 1 minute or until you hear of a short
beep, and then you will be able to see the MPNO symbol and the signal strength on the TV. If
you don’t have access to a TV, wait for 1 minute or until you hear a short beep. Then you can see
the information on the TFT LCD display.
Note:
During the process, slightly move the camera to
make sure the LED light in the front keeps flashing. If you wait too long (over three minute), the
screen may power off to save battery. If that happens, you’ll need to switch to OFF and then
TEST to start over.
Signal strength can be full 6 columns. To make the MMS module to work, at least two bars are
required. If you only see one bar, the reception is too weak for the MMS to function.
LTL
ACORN
®