Ltl Acorn Ltl-5511 MG, Руководство пользователя, Страница: 25 / 42

- 23 -
Retrieve the SD card and insert it in the camera. Switch to the
TEST
position to enter the TEST
mode. Message“Updated smtp.dat Successfully” show up on the TFT display, indicating the
setup file has been successfully installed on the camera.
3.6 SMS Remote Control & Table of Command Code
In order to communicate with your camera via text message/SMS, you need to format your texts
in a certain way, essentially speaking the same language as the camera. Or download the SMS
Remote Control APP from LTL ACORN’s website (www.ltlacorn.cn) to send SMS commands,
please refer to the Instruction of SMS Remote Control APP for operation details.
 All the SMS commands should start with “LTL(ltl)” and end with “AA(aa)”.
 Between “ltl” and “aa”, insert the specific instructions you want the camera to follow. You
can choose to give one instruction at a time, but it saves time to combine them together.
 A specific instruction is made up with four parts in the following sequence: a two-digit order
code, an asterisk (*), a code value (a number or a combination of numbers and letters), and
lastly a pound/hash sign (#). See the “Example” column for illustrations.
 Both capitalized and non-capitalized letters can be used in a command.
 Do NOT leave any spaces between any of the letters and symbols.
 Do NOT put a comma or a period at the end of the text. Again, a command starts with “ltl”
and ends with “aa”. Do NOT include any quotation marks in a command; they are used here
just for explanation purposes.
 The maximum for text messages is 60 bytes. If you want to send multiple commands, please
do so in separate texts.
An example of a command would be LTL01*0#02*2#06*S30#07*10A3Z#60*1#AA
Which asks the camera to 1) be in camera mode and take only pictures, 2) set image size to 2MP,
3) take pictures with an interval of 30 seconds, 4) turn on serial number and set it to “0A3Z”, and
5) immediately take a picture and send it to you.
 For SMS remote control setting, different value comes with different extra power
consumption:“0” the highest and “off” zero.
 If your phone number is put in properly during setup, once the camera receives the
command, it will send you a text message saying “Message format OK”. If the code 60
function is turned on, the camera will also send a picture that it takes after executing the
command along with the text message.
Note: When using order code 12 and13 to set additional phone numbers or email
addresses, make sure to fill in code 12 first before 13. The number or e-mail added
by using code 13 will not be accepted if the code 12 slot is empty.
LTL
ACORN
®