Original Instructions for Installation, Use and Maintenance
Active Chilled Beam Type HDC
Section:
Page:
Date:
AG--B 213.1e
22
Feb. 2010
The Innovation Company
LTG Aktiengesellschaft
E
LTG Aktiengesellschaft
⋅
Grenzstraße 7
⋅
D-70435 Stuttgart
⋅
+49 (0711) 8201-0
⋅
Fax -720
Internet: http://www.LTG-AG.de
⋅
E-Mail: [email protected]
⋅
Printed in Germany
⋅
Ausgaben mit früherem
Datum werden hiermit ungültig
⋅
Technische Änderungen vorbehalten
⋅
Former editions are invalid
⋅
Subject to technical modifications.
4.3.2
Plug-in Connection Cuprofit
O--Ring EPDM
Polysulfone ring
Inner ring
Outer ring of copper
Stainless steel retaining ring
Tube connection of plug--in fitting and bright copper tube according to EN 1057 and RAL 641/1 or suitable
brass or red brass socket.
This permanently tight connection is suitable for concealed installation.
Using special tools, this connection may be detached up to three times when not under pressure.
Prior to reconnection, check for undamaged condition of the seal.
Check every installation for tightness when completed.
Due to their specific design, Cuprofit connectors are not suitable for use as grounding conductors for electrical
installations and therefore not to be considered in the compensation of potential.
Maximum operating pressure 10 bar / 93
_
C. Test pressure 16 bar / 30
_
C.
