LSS MasterPort 2, Руководство пользователя

Страница: 30 / 68

MasterPort 2
30
Selection Meaning
Mode Off: Ethernet will not receive. DMX-Out is disabled.
Single:
The first active data source is used until it fails with a time out. Then the
data of another active source on the same subnet and universe are used.
The data-source detection in place for
- AVAB / IPX by direct evaluation of the MAC address
- sACN by the device ID
- All other protocols through the IP address of the data source. This must
be specific to each data source.
Merge4:
Data from up to four data sources can be merged (HTP - Highest Takes
Precedence). If more than four sources transmit on the same subnet and
universe, the data of the source(s) coming up after the first four will be
ignored. If one of the first four data sources fails, automatically advances
the data source from the ignored, which first sends data after the failure
(principle “First come, first serve”).
DMX-In x: DMX data from the selected input will be used only.
All: All data from Ethernet and DMX-In will be used.
Universe Setting of the sending universe (depends on the protocol)
Subnet Setting of the sending subnet (depends on the protocol)
►
Change settings
◄
Return to parent menu / Save settings
For protocols with priorities are the following features:
Protocol Priority treatment
AVAB/UDP Priority 1 ... 200: The data source with the highest priority value wins.
Several data sources with the same highest priority are merged (HTP).
Data sources that send 0 will always be merged (HTP) with data source(s)
with the highest priority.
sACN Priority 1 ... 200: The data source with the highest priority value wins.
Several data sources with the same highest priority are merged (HTP).
Data sources that send 0 are treated as priority 100