LSS MasterPort 2, Руководство пользователя

Страница: 26 / 68

MasterPort 2
26
View→PSU
This submenu shows monitors that provide an overview of current and voltage supply to the PSU
ports. Each PSU port has its own monitor.
Selection Meaning
Port 1 Calls up monitor PSU port 1
Port 2 Calls up monitor PSU port 2
Port 3 Calls up monitor PSU port 3
Port 4 Calls up monitor PSU port 4
►
Calls up monitor
◄
Return to parent menu
View→PSU→Port x
Selection Meaning
Line 2
x.x V (left) Shows PSU input voltage
x.x V (centre) Shows voltage at PSU port
x.x A Shows load current
x.x A! Shows load current approaches set switch threshold
Line 3
Mode Shows the set action when switch threshold is reached
On/Off (right) Shows the current switching state of the PSU port
Line 4 (following indicators never occur simultaneously)
No load There are no loads. All voltages within the parameters.
Normal load A load is connected to the PSU port. The PSU port operates within the set
and allowed parameters.
24V supply failure 24V PSU power supply is not available.
24V out of range! The outgoing PSU voltage is out of the factory parameters. Check power
supply!
24V from outside! Energetic recovery! Check connection! The device may be destroyed!
Current Overload The PSU-port has been automatically disabled. The load current was ei-
ther higher than the switch threshold or higher than 5A.
Short / Overtemp! The PSU-port has been automatically disabled. A short circuit is present,
or a temperature above the safety parameters were measured.
◄
Return to parent menu