DX Loudspeaker Controller User Manual
13
6.2 System Menus
The
System Menus
allow the user to control and change parameters that
are related to the system behavior and general operation. It can be
accessed by pressing the
System one touch key
SYSTEM MENU
– use the rotary thumb wheel to select and press to confirm
selection
*Load a Xover
Store a Xover
Erase a Xover
System Set
Signal Generate
-Load a Xover - Program Recall
The DX has a built in non-volatile memory that can store up to 30 different
program setups. A pr ogram can be recalled using this menu.
Load a Xover – use the rotary thumb wheel to select and press to confirm
selection
*User Mode
Factory Mode
Load a Xover: User Mode
*1
2
3…
•
PROG - Program Number to be recalled.
-Store a Xover - Program store,
– use the rotary thumb wheel to select and
press to confirm selection
The DX has a built in non-volatile memory that can store up to 30 different
program setups. A prog ram can be stored using this menu. The old
program with the same program number will be replaced. Once the
program is stored in the flash memory, it can be recalled at a later time,
even after power down.
LSS
Advanced Speakers Systems
via On. Longo 53 89024 Polistena (RC) ITALY tel +39 - 0966 - 932199. fax +39 - 0966-933007 e-mail: [email protected]
