LSL 120H125, Инструкция по установке

Страница: 5 / 12

————————————————
Accessories from
—
The Original
——
Rev. 01 31/01/2011 Page 1 of 3
Fitting Instruction
Article-No. : 120H125
Product : Super Bike Conversion Kit
Model : Honda CBR 1000RR 2008

Type : SC59
Important:
Read this instruction manual carefully and mind all warnings and tips. You should do this work
only if you‘re qualified; otherwise we recommend this mounting to be done by a qualified
workshop. Improperly mounting of this kit can reduce the driveability of the motorcycle and may
be a risk to your health and life.
Special works are marked with the following signs. Please take special care on these works.
Warning! Important mounting instruction. It shows risks to your life and health.

Tips for mounting and maintenance or to avoid damage.
Fitting:
Mounted conversion kit
The battery ground should be disconnected before working on electric wiring and switches! The
tank cover needs to be removed.
Remove brake-hose(s). Caution: avoid brake fluid on painted surfaces! Any work on the brake
system or bleeding the system should be done by an authorized dealer or a qualified
mechanic!
Remove handlebar controls, clutch lever bracket and brake cylinder assy, then remove the original
handlebar.
Assure that the front wheel is free from any load when dismounting top yoke, also have a
look on page 3 because now it’s easy to re-route.
Then swap top yoke. Fit the ignition lock with

