LSIS EMPR DMPi Series, Руководство пользователя

Страница: 91 / 107

Terminal Configuration (S-EMPR MMP-PM)
Terminal Configuration (S-EMPR MMP-CM)
Terminals Description Remarks
Va, Vb, Vc Voltage input Current model Blank
Z1, Z2
ZCT input
Universal (Z1, Z2 : 1.5mA)
Z2V, Z1V Dedicated (Z2V, Z1V : 100mV)
Z2V, Z1V
4~20mA (+), (-)
4~20mA output -
TRX1+, TRX1-
RS485 communication Modbus(1 channel)
TRX2+, TRX2-
A1, A2
Control power input 110Vac or 220Vac 50/60Hz
C1 Contact input Common -
Lop/Stop, For,
Rev, Res, E/S
Contact input RES : Reset, E/S: Emergency Stop
C2 Relay output Common -
Main, Y, D, Auto,
Volt
Relay output
D: Delta, VOLT : output contacts
for voltage & power elements
C3 Relay output Common Aux output Common
Aux Relay output Current element output contacts
Terminals Description Remarks
A1, A2 Operating power input terminal 110Vac or 220Vac 50/60Hz
C1 Contact point in put common Lop/Stop, For, Rev, Res, E/S contact point
Lop/Stop Lop operation mode selection and external stop S/W -
For External On(Forward) input S/W On input in Lop/Auto operation
Rev Reverse input S/W in forward/reverse starting REV input in Lop/Auto operation
Res External Reset S/W Reset input in Lop operation
E/S External Emergency Stop S/W -
C2 Contact point output common Main, Y, D, Auto contact point
Main Motor On output If forward/backward staring, forward rotation output
Y
Y-Delta starting: Y contact point output -
Inverter starting: Inverter contact point output -
Full voltage starting: No use -
Forward/backward staring: No use -
Reactor starting: No use -
D
Y-Delta starting: Delta contact point output -
Forward/backward staring: reverse rotation contact point output -
Reactor starting: Reactor (R) contact point output -
Inverter starting: Bypass contact point output -
Full voltage starting: No use -
Auto Auto state signal output If Auto state mode is selected
C3 Contact point output common Aux contact point only
Aux Current factors contact point output -
Z1,Z2 Zero current transformer output connection terminal Universal ZCT(200mA/1.5mA)
Z1V, Z2V Zero current transformer output connection terminal ZCT(200mA/100mV) for DMP
+,- 4~20mA output -
TRX+,TRX- RS485terminal -
Voltage
Power
supply
Power
supply
Terminal Configuration / Wiring
&
cable connection
90 Electronic Motor Protection Relays