background image

SAS2 Integrated RAID Solution User Guide

Chapter 4: Overview of Integrated Striping

 | 

Introduction

LSI Corporation Confidential 

August 2010

Page 23

Chapter 4 

4.1 Introduction

The LSI Integrated RAID solution enables you to create Integrated Striping volumes for 
applications that require the faster performance and increased storage capacity of 
striping. The low-cost Integrated Striping feature has many of the advantages of a more 
expensive RAID striping solution. You can configure an Integrated Striping volume as 
the boot disk or as a data disk.

The Integrated Striping solution provides better performance and more capacity than 
individual disks, without burdening the host CPU. The firmware distributes host I/O 
transactions over multiple disks and presents the disks as a single, logical drive. In 
general, striping is transparent to the BIOS, the drivers, and the operating system.

You can use the LSI SAS2 BIOS CU to configure Integrated Striping volumes. These 
volumes can consist of two-to-ten disks.

4.2 Integrated Striping Features

Integrated Striping supports the following features:

Support for volumes with two-to-ten disks

Support for two Integrated Striping volumes with up to 14 drives total on a 
SAS2 controller. 

Support for combining one Integrated Striping volume and one Integrated 
Mirroring, Integrated Mir Striping, or Integrated Mirroring Enhanced 
volume on a single controller.

Support for both SAS and SATA drives, although you cannot combine the two types 
of drives in one volume

Fusion-MPT architecture

Easy-to-use SAS BIOS configuration utility

Error notification

Disk write caching, which is enabled by default on all Integrated Striping volumes

Use of metadata to store volume configurations on disks

OS-specific event log

Error display inside the Fusion-MPT BIOS

SCSI Enclosure Services (SES) status LED support for drives used in Integrated 
Striping volumes

Overview of Integrated Striping

This chapter provides an overview of the LSI Integrated RAID features that support the 

creation of striped arrays. 

Содержание SAS2 Integrated RAID Solution











































Отзывы: