![background image](http://html.mh-extra.com/html/lsi-robway/rci-1550-lm/rci-1550-lm_instruction-manual_1944229020.webp)
5.8.4.8.
Slewing Zone Switch/es input/s
Fit slewing zone indicator micro-switch (or proximity switch) provided at a convenient place
near the centre of rotation providing run on and off ramps as required for the particular
application. This switch will convey a signal to the Control Unit when the crane moves into
a zone of restricted capacity rating. For correct wiring instruction refer to drawings at the
back of this manual.
The switc h w iring requires a "voltage free"
connection. Never connect the switch wiring into
any othe r s ystem/wiring loom unless th e exact
nature of the connection is known.
5.8.4.9.
Motion Cut
If motion cut is required the client shall provide appropriate solenoid valves/devices to
activate the function and wire them as shown in this manual.
5.8.4.10. Connections
1. Permanent display damage ma y occur if
incorrect motion-cut connections are made.
2. POWER MUST BE DISCONNECTED before
attempting connections.
3. NEVER insert larger capacity fuses than those
originally supplied.
4. Obtain specialist assistance if
you are
unfamiliar with crane electrics.
5. The Robw ay relay contact ampere rating must
not be e
xceeded when dire ctly operating
hydraulic or mechanical solenoid devices or high
capacity relays. For s uch devices a “slave” rela y
must be used.
The switc h w iring requires a "voltage free"
connection. Never connect the switch wiring into
any othe r s ystem/wiring loom unless th e exact
nature of the connection is known.
5.9. Upgrading to RCI-1550 from earlier Robway model displays.
The RCI-1550 display/controller utilises the same sensors as used on other RCI series systems.
However, it is recommended that all earlier version systems used negatively switched motion-cut
output signals. The RCI-1550 can be configured for either negative or positive type outputs. Please
ensure the preferred arrangement is connected via the digital section connector strips.
Содержание RCI-1550 LM
