maXim
S & M
Front Panel Tour
Operator Manual V3
LSC Lighting Systems (Aust) Pty. Ltd
Page 9
4.14 STACK
MASTER
It controls the overall level of the Stack Playback.
4.15 STACK
FLASH
It is a multi purpose button and can be used to;
•
Select the Stack Master when assigning,
editing or copying a stack.
•
FLASH (bump) the contents of the Stack
Master. (See also FLASH level and
ADD/SOLO button).
The brightness of its LED shows the level of the
master at the output of the
maXim.
4.16 >
(STACK)
It starts a crossfade from the current step to the
next step. In conjunction with the step/stop button
(below) it steps (snaps) a stack in the forward
direction.
4.17 <
(STACK)
It starts a crossfade from the current step to the
previous step. Only one reverse
crossfade
is
allowed. In conjunction with the step/stop button
(below) it steps (snaps) a stack in the reverse
direction.
4.18 STOP/STEP
(STACK)
It stops a crossfade. It momentarily runs a stopped
crossfade when held down. In conjunction with the >
and < buttons it steps (snaps) a stack in the either
direction. In conjunction with the EDIT wheel, it allows
you to instantly jump to any step.
4.19 DOT MATRIX DISPLAY AND LEDS
The display is used to scroll messages and
prompts and to show names and numbers. The
small labelled LEDS beside the display are used
to
define
the
numbers shown on it. For example;
•
If the CHAN LED is lit, then the number
displayed is a
channel
number.
•
If the LEVEL LED is lit, then the number
displayed is a
channel
level
.
Comprehensive information (including these
messages) are also shown on the optional video
output.
4.20 RECORD SCENE BUTTON
Used to select RECORD SCENE mode or to
record a snapshot of the output of the
maXim
as
a step in a stack or a chase or into the Grab
master.
4.21 RECORD CHASE BUTTON
Used to select RECORD CHASE mode and to
complete the recording of a chase when all the
desired steps have been added.
4.20
4.29
4.19
4.24
4.25
4.26
4.27
4.28
4.30
4.31
4.33
4.32
4.21
4.22
4.23
4.17
4.15
4.16
4.18
4.14
4.3
