QUICK REFERENCE
Note: When the RECORDING or PREVIEW/EDITING, all Submasters flash twice, then Submasters
containing Scenes are lit, Submasters containing Chases flash and empty Submasters are not lit..
RECORD A SCENE
To record the current output as a Scene into the current page, press: [RECORD], (SCENE)
[S/A] (Scene number) (any of the RED preset Solo/Assign keys)
GRAB THE OUTPUT IN GRAB MASTER
To record the current output into the Grab master, press: [RECORD], (SCENE)
[S/A] (Grab master)
RECORD A CHASE
To record a Chase in the current page, press: [RECORD], (CHASE)
[S/A] (Chase number) (any of the RED preset Solo/Assign keys or the Grab S/A key)
Each step of a Chase consists of a snapshot of the output which is taken as that step is “added”.
Create the look for the first step on the output, then to record it as the first step, press;
[RECORD], (ADD STEP)
Create the next look on the output.
To record this step, press;
[RECORD], (ADD STEP)
Continue to create and record steps as above.
When all steps have been recorded, complete the chase by pressing;
[RECORD], (END CHASE)
PLAYBACK A CHASE or SCENE
If not already in SCENE mode, press [MODE] until the “Scene” mode LED lights.
Fade up the Submaster containing the recorded chase or scene and also the Red preset master.
CONTROLLING A CHASE
To control a chase you must edit that chase.
Press [PREVIEW/EDIT]
[S/A] (Chase number)
•
To control the
RATE
rotate the edit wheel.
•
To
BASS STEP
the chase (Sound To Light), set the rate below 0 BPM. (See also “BASS LEVEL”, below).
•
To change the
FADE
between steps, press [FUNCTION] until IN & OUT light, then rotate the edit wheel.
•
To change the
MODE
or
DIRECTION
use the 3 keys below the Edit wheel as described below.
KEYS
ACTION
[STOP/STEP]
STOPS
a running chase.
STEPS
a
stopped
chase.
[
>
]
(Forward)
STARTS
a stopped chase and runs it forward.
Changes the
DIRECTION
of a reverse running chase (runs it forward).
SNAPS a forward running chase to the next step.
[
<
] (Reverse)
STARTS a stopped chase and runs it backwards.
Changes the DIRECTION of a forward running chase (runs it backwards).
SNAPS a backward running chase to the next step.
Hold [
>
], Tap [
<
]
Selects
BOUNCE
mode.
Hold [
<
], Tap [
>
]
Also selects Bounce mode.
[
>
]
Deselects Bounce mode (runs forward).
[
<
]
Deselects Bounce mode (runs reverse).
Hold [Stop/Step], Tap [
>
] Selects
SINGLE SHOT
mode.
[
>
]
Runs a Single Shot in the forward direction (see also below).
[
<
]
Runs a Single Shot in the reverse direction (see also below).
Hold [Stop/Step], Tap [
<
] De-selects single shot mode.
•
When finished, press [PREVIEW/EDIT] (to de-select it).
The latest settings are automatically saved.
In
normal mode
(not in Preview/Edit);
•
To run a chase that has been
set in
single shot
mode, press; [S/A] (Chase number).
•
To adjust the BASS STEP audio level, press [FUNCTION] tap [S/A 12] (
BASS LEVEL
), then rotate the edit
wheel. When the chase is satisfactorily stepping to the beat, press; [YES] to save the setting. The STEP
LED flashes and the chase steps on each beat of the music. (See also “BASS STEP”, above).
