LS tractor MT458, Руководство оператора

Страница: 92 / 242

3 - 18
⑤
Regeneration mode
 In this mode, the operator does not need to take
any actions, the system is activated
automatically by the engine electronic controller.
NOTE : The regeneration is the normal operating
mode.
 The regeneration will be activated by ECU ;
- When soot’s rate reaches 100% or more.
- When the engine is warmed up enough.
- When the DPF switch is not pressed to the
Inhibited regeneration mode.
NOTE : Regeneration will be lasted for
approximately 15 to 25 minutes.
▶
Fire hazard!
During the Diesel Particulate Filter(DPF) regeneration process, the exhaust stack
and fixed hood area becomes extremely hot. Park the machine outside and away
from combustible or highly flammable material.
Failure to comply could result in death or serious injury.
Warning
▶ If engine is turned off during the regeneration, soot will not be completely burned
and may increase fuel consumption. KEY-OFF during regeneration mode is not
recommendable because too short operation won’t finish regeneration mode, So,
we recommend to users to operate until all indicator lights are turned off without Key
switch OFF.
NOTICE
 If pressing and holding the upper part of the DPF switch over 3 minutes, the regeneration can be
activated manually. In this case, if the soot’s rate is reached over minimum 30%, the regeneration
will be activated.

During the regeneration, the DPF regeneration indicator(1) and DPF temperature indicator(2) will be
turned on.
 In case of turning off the engine while the regeneration is processing, the regeneration is to resume
again when restarting the engine.
1 2