34
Q. Even if the wireless LAN is turned on, the wireless LAN Icon doesn’t come out.
A. First, please make the Power of the
wireless LAN turned off.
After performing COLD Reset (HW Reset), please turn on
the Power of the wireless LAN
again.
If it is not working, please inquire to our A/S Center.
Q. Auto Profile is not searched.
A. There might be no AP in the corresponding region.
1.
Please move to a region where AP of the wireless LAN is provided.
Please search AP again after movement. If it is not searched, go to No. 2…
2.
Please search again after Reset.
If it is not searched, please inquire to our A/S Center.
4.
RFID
Q. Tag cannot be read.
A. If there is an obstacle in front of a terminal or there is a scar at Tag, the phenomenon
that cannot read is generated.
1.
Please remove an obstacle between the front of a terminal and Tag.
2.
Please confirm whether there is a scar or foreign matters at Tag to be read.
The Tag containing a scar or foreign matters might not read Tag.
3.
Please confirm the distance between a terminal and Tag.
As there is the distance to be assisted per Tag, please try again at the proximity distance
(within 20cm).
4.
Please confirm the present battery state.
If the Power is very low, it is basically set not to read Tag, so please charge the battery.
5.
Others
Q. The terminal stopped without any motion.
A. Please Reset
Q. The error report comes out.
A. The error report provided by MS can be assisted at the terminal.
Even if you don’t send the error report, it is all right..
6.
Disposal
1.
Please separate non-iron material (liquid, liquid phase), etc. based on ISO 14000
regarding RFID Reader, divide materials causing environmental pollution and reusable
materials and dispose it to a designated place.
