LS Industrial Systems GIMAC-II, Руководство пользователя

Страница: 101 / 123

45
;AD7!===IgYfAUbiU`
Command A0h
Sub Command Field of the control command executed
Sub Command 2 Field of the control command executed
Data Check Sum Check Sum
b) NAK
Command A1h
Error Code 01 ~ 04
Data Check Sum Check Sum
Error Code
01 : Wrong control command, 02 : Not being able to execute
03 : Lack of Data, 04: DATA range is incorrect
11.2.2 Command for controlling a point
Not requiring ACK Signal Requiring ACK Signal
Command 20h 28h
Sub Command Control Point
Data Check Sum Check Sum
- Checksum(1Byte) = (Command 1Byte + Sub Command 1Byte + Data 0~9Byte) / 256
⇒
The residual
※ Checksum is the sum of each bytes not to include OVERFLOW.
Control Point
02 : Relay Fault Reset
03 : Clear Wh
04 : Clear varh
05 : Clear All SOE Data
06 : Clear CB ON Counter
07 : Clear CB ON Time
08 : Clear V0 Max.
09 : Clear All Backup Data
11.2.3 Command for setting SOE event.
Not requiring ACK Signal Requiring ACK Signal
Command 23h 2Bh
SubCommand 00h
Fault #1
Fault #2
CB
Data
Reset