Guest Message
The Guest Message is the default canned message sent to Guest Alpha Pagers. To change the message.
1. Press SETUP and enter Password.
2. Press 1 for 1) System.
3. Press F2 (DN) until 1)POCSAG-> is displayed.
4. Press 1 for 1)POCSAG->.
5. Press 3 for 3) Guest Message.
6. Type a number 00-99 for selected canned message and press ENTER.
Note:
See pg. 16 for Creating Alphanumeric Messages.
Freeform Guest Message
When the Freedom Transmitter pages Guest Alpha pagers, the user is given a default message and the abil-
ity to add an extension, example 035125 = "Table Ready 125".
The user can select to have a Freeform message when they control what is entered and if the message can
be edited.
Features for editing guest messages can be accessed by:
1. Press SETUP and enter Password.
2. Press 1 (System).
3. Press F2 (DN) until screen shows 1 (POCSAG).
4. Press 1 (POCSAG).
Display the Guest and Staff Prompt
When paging Guest or Staff Alpha Pagers, the user is shown a prompt:
Freedom Transmitter screen Display
To Enable or Disable Seeing This Prompt While Paging:
1. Press SETUP and enter Password.
2. Press 1 (System).
3. Press F2 (DN) until screen shows 1 (POCSAG).
4. Press 1 (POCSAG).
5. Press F2 (DN) until screen show 1 (Disp Prompt).
6. Press 1 (Disp Prompt).
7. Press F1 (YES) to display, or F4 (NO) to not display.
If Display Prompt is disabled, the message sent will default to the Guest Message.
SelectPageMode
MSG:035----
Out:TableReady
Exit
Long Range Systems
19
Freedom User Manual
