Repeat Delay
When using a repeater, it may be necessary to add a delay between pages when paging multiple pagers to
allow the repeater time to repeat the signal and detect the next one. To add repeat delay:
1. Press SETUP.
2. Enter Password.
3. Press 1) System.
4. Press F2 (DN) until the display shows 2) Repeat Delay.
5. Press 2 (2: Repeat Delay).
6. Select F1 (Yes) to enable or F4 (No) to disable.
ID Span
In very large systems up to 9999 Guest pagers can be paged. To do this, ID Span is required. This function
disables normal System ID functions except for Staff Paging and allows the programming of Guest Pagers
from 1000 to 9999.
To use ID Span:
1. Press SETUP.
2. Enter Password.
3. Press 3) Other.
4. Press 2) ID Span.
5. Select F1 (YES) to enable or F4 (NO) to disable.
Alphanumeric Pager Button Enable/Disable
The buttons on an Alpha Pager can be enabled or disabled.
1. Press SETUP and enter Password.
2. Press 1 for 1) System.
3. Press F2 (DN) until 1)POCSAG-> is displayed.
4. Press 1 for 1)POCSAG->.
5. Press 2 for 2) Btns Enabled.
6. Press F1 (Yes) to enable Alpha Pager buttons, or press F4 (No) to disable Alpha Pager buttons.
Alpha Pager Vibration Level
The strength of vibration when an Alpha Pager receives a Vibration Alert can be varied.
1. Press SETUP and enter Password.
2. Press 1 (System).
3. Press F2 (DN) until screen show 1 (POCSAG).
4. Press 1 (POCSAG).
5. Press F2 (DN) until screen displays 1 (Vibe Strength).
6. Press 1 (Vibe Strength).
7. Press F1 (UP) to increase the level or F2 (DN) to lower the level.
8. Press F4 (Done) when finished.
Long Range Systems
18
Freedom User Manual
