Long Range Systems
29
T9100 User Manual
Using the Star Pager
Charging
Any rechargeable pager will require use of an LRS charger. The Star Pager (SP4) uses the Charger 9 (CH-R9)
1. Place the pager in the charger
2. Allow unit to charge fully overnight (at least 24 hours)
3. Remove from charger, and pager will vibrate, beep, and light
4. Replace the pager in the charger at the end of each day
Messages
The pager can vibrate, beep, and light up message lights.
• Star pagers are intended to vibrate the number of times determined by the Vibe mode selected.
On the T9100 this is done by choosing the V1, V2 or V3 button. This can be a way to send ad-
ditional information or to identify 1 of 3 stations.
• On the front of the pager are four lights 1 through 4. In normal operation each “station” or
T9100 would be set for different STATION ID’s (e.g. kitchen is station 1, etc.) Each station will
also send different messages (example 1st light for station 1, 2nd light for station 2, 4th and 1st
light for station 5, etc.). So if they were paged they can look down at the pager to see which sta-
tion sent the message (which light was lit). As an option you can also send the message as a
V1 for a station one message, or V2 for station 2, or V3 for station 3. This will enable the per-
son being paged to avoid having to look down to see the lights.
1
2
3
4
800.437.4996
www.pager.n
et
1
4
