Using the T9100
Time and Date
Initial Power Up
During power up, to enter the time and date:
• At [enter time], enter the hh mm (hour, minute) using the number keys, and then press ENT.
• Press 2 for AM or 10 for PM.
• At [date], enter the mm dd yy (month, day, year) using the number keys, and then press ENT.
Clock Menu
The time and date can also be set from the Clock menu by:
•
Press PROG – PROG – 1 – ENT.
•
Press the button under set.
•
At [enter time], enter the hh mm (hour, minute) using the number keys, and then press ENT.
•
Press the button under AM or PM.
•
At [date], enter the mm dd yy (month, day, year) using the number keys, and then press ENT.
•
If done, press Yes (button under Yes), if not, press No (button under No.)
Note:
The transmitter will use a default selection of “Yes” after 30 seconds of inactivity.)
Send Time
This feature will automatically send the current time and date to the pagers every 15 minutes. The default
setting is OFF.
To enable:
• Press PROG – PROG – 1 – ENT.
• Press button under Send.
• At [Auto] select button under ON.
• If done, select Yes (button under Yes), if not, select No (button under No.)
To disable:
• Press PROG – PROG – 1 – ENT.
• Press button under Send.
• At [Auto] Press select button under OFF.
• If done, select Yes (button under Yes), if not, select No (button under No.)
Paging
To page pagers 1 through 99, enter the 2 digit pager number using the number keys. The 10 key also is used
as the 0 key.
All Call
If all staff pagers need to be called at once, press the 86 key.
Manager Pagers
To page the managers, press the M1 for the #1 manager pager or M2 for the #2 manager pager.
Cancel Page
To clear/cancel a pager to the server, press the Cancel Key under the pager number.
Long Range Systems
9
T9100 User Manual
