Long Range Systems
13
T9100 User Manual
• If done, select Yes (button under Yes), if not, select No (button under No.)
Manager
To set the Manager to be paged once after the third re-page:
• Press PROG – PROG – 6 – ENT.
• Press button under More.
• At [mgr] press button under Mgr.
• Press button On.
• If done, select Yes (button under Yes), if not, select No (button under No.)
To turn Off the Manager to be paged:
• Press PROG – PROG – 6 – ENT.
• Press button under More.
• At [mgr] press button under Mgr.
• Press button under Off.
• If done, select Yes (button under Yes), if not, select No (button under No.)
Repeater Delay
When using a repeater it may be necessary to add a delay between pages when paging multiple pagers to
allow the repeater time to repeat the signal and detect the next one. Default setting is OFF.
To add repeat Delay:
• Press PROG – PROG – 6 – ENT.
• Press button under More.
• Press button under repeater.
• At [rPt], press button under ON to enable the Repeat Delay. Press button under OFF to disable
Repeat Delay.
• If done, select Yes (button under Yes), if not, select No (button under No.)
Duty Pager
The duty pager is used to remind someone of a periodic repetitive task. To setup:
• Press PROG – PROG – 7 – ENT.
• At [duty] press button under On. (After 10 seconds, the screen will default to Off.)
• Enter the Duty Pager number with the keypad, then press ENT.
• Enter Vibe Level (value of 1, 2, or 3), then press ENT.
• Enter the repage time as mm ss (minutes, seconds), then press ENT.
• Screen will briefly display the new settings.
• If done, select Yes (button under Yes), if not, select No (button under No.)
To disable the Duty Pager:
• Press PROG – PROG – 7 – ENT.
• At [duty] press button under Off.
• If done, select Yes (button under Yes), if not, select No (button under No.)
Restaurant ID
The ID of the Restaurant system. Set if more than one LRS system is in an area to prevent interference. To set:
• Press PROG – PROG – 1 – 4 – ENT.
