LPKF ZelFlex Z4P, Руководство пользователя

Страница: 21 / 24

Rev.: 13.01.2014 21 User Manual v2.11
tRoUBleshootIng
8.4 Stencil care
Care should be taken when inserting the stencil onto the frame and when inserting the frame
into the printer (please observe printer manufacturer’s instructions, if available).
use a metal or plastic spatula to remove the majority of solder paste from the stencil.
Care should be taken when removing the stencil from the frame.
Final hand cleaning should be done with care using cleaning agents recommended by
manufacturers of the solder pastes and adhesives.
If a screen washing machine is used, please observe the manufacturer’s instructions.
Damage could occur if stencils are exposed to mechanical friction.
If a brush is used to clean the stencil, damage can occur, especially in fine pitch areas.
When using a stencil with sharp edges, use of protective gloves is recommended.
Do not wash the ZelFlex frame in a cleaning machine.
It is recommended to store unused stencils in an appropriate storage system.
Several storage systems are available on the market.