LPKF ZelFlex Z4P, Руководство пользователя

Страница: 20 / 24

Rev.: 13.01.2014 20 ZelFlex Z4P
MaIntenance
8 MAiNtENANcE
8.1 General
ZelFlex frames are designed to be operated maintenance free, except for cleaning.
Always use clean and dry compressed air to avoid particles and humidity entering into the
ZelFlex frame.
Most soldering pastes and glues can be cleaned using isopropyl alcohol.
Never clean ZelFlex frames using cleaning devices or dipping them into cleaning
solvents!
8.2 cleaning the frame
No cleaning solvent should enter the ZelFlex frame!
Pastes, solders or adhesives must be cleaned in accordance with the manufacturer’s instructions
regarding each individual substance.
Take care to follow manufacturer’s instructions for each individual substance!
8.3 cleaning the stencil – Washing Frame (optional)
Matching the respective to sizes of the ZelFlex frames/stencils, two special washing frames for
stencils with ZelFlex perforation are available:
• LPKF ZelFlex Washing frame 584x584:
For stencils with Z4P perforation with frame width of up to 584 mm (23”) and frame length of 508 - 584 mm
(20” - 23”)
• LPKF ZelFlex Washing frame 736x736:
For stencils with Z4P perforation with frame width of up to 610 mm (24”) and frame length of 610 - 736 mm
(24” - 29”)
The stencil is easily clamped onto the washing frame,
which provides support and protection of the stencil
during washing.
The washing frame is designed to be inserted into
a cleaning agent solution or/and ultrasonic cleaning
system.