2 1
2 0
TECHNIC
AL SPECIFIC
A
TIONS
7
>
TECHNICAL SPECIFICATIONS
The Mobilift M6
®
Connect i is marked as a medical device by virtue of Annex II of
regulation 93/42/EEC (applicable standards IEC 60601-1 Ed3 and related standards)
Your Mobilift M6
®
Connect device requires special care concerning the EMC, it must be
installed and service according to the information provided in this user guide. Portable and
mobile RF communication devices must not be used within 30cm of your device, they can
cause undesired operation. The use of other treatment heads than those provided by LPG
Systems may result in increased emissions or decreased immunity of the device.
Your Mobilift M6
®
Connect device should not be used adjacent to or stacked with other medical
devices. Interference may occur near equipment marked with the following symbol:
Your Mobilift M6
®
Connect doesn’t manage essential performances.
For more information concerning the electromagnetic compatibility, refer to “Electromagnetic
compatibilty” appendix.
W
ARRANTY
8
>
GENERAL WARRANTY CONDITIONS
Dimensions: length x width x height: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65 x 26 x31 cm
Net weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10.5 kg
Maximum set depression: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35 kPa (350 mbar)
Cooling: . . . . . . . . . . . . . . . . . . . . . . . . . .by mechanical ventilation incorporated into the pump
Protection index: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . IP20
Electrical protection class: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Operating temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +10°C to +30°C
Storage temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20°C to +70°C
Electrical features: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100-240V / 50-60Hz / 80 VA
Wifi: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4Ghz b/g/n
EIRP: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100mW
Operating environment:
Ambient temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 30° C for normal operation.
Ambient relative humidity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 to 75% without condensation.
Atmospheric pressure: . . . . . . . . . . . . . . . . . . . . . . . . . . no significant influence for operation.
Max altitude: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,500 m
Environmental characteristics of transport and storage:
Ambient temperature: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -20°C to +70°C
Ambient relative humidity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 to 90% without condensation
Atmospheric pressure: . . . . . . . . . no significant influence of ambient conditions in operation
Unit fitted with patented treatment heads.
Device designed for uninterrupted use.
You have recently acquired an appliance
distributed by LPG Systems or an LPG Systems
approved distributor.
It is the purchaser/user’s responsibility to find
out from the local authorities the conditions
and professional qualifications required before
using the appliance. The purchase of this
equipment implies the legal acceptance by the
purchaser/ professional user of these general
warranty conditions.
If the appliance was sold to you by an approved
LPG Systems distributor, the purchaser/
user should refer to the supplier’s warranty
conditions. These may in no way increase the
undertakings made by LPG Systems in these
present warranty conditions. The warranty can
only be implemented and is only valid if the
warranty slip has been duly filled out and
returned to LPG Systems within two weeks of
delivery, irrespective of the country. Warranty
slips that are only partially completed will be
rejected.
The appliance is guaranteed against
manufacturing flaws and defects in the raw
materials.
The warranty extends for the shorter
of the following two periods: one (1) year
OR two thousand (2,000) hours of use from
the invoice date. During this period, LPG
Systems undertakes to exchange or repair
free of charge, as quickly as possible, any
part that LPG Systems acknowledges as
defective, however LPG Systems does not
undertake to replace the entire appliance.
Traveling and living expenses for our
technicians and transportation costs of the
appliance or parts to and from the aftersales
service workshop are not covered by this
warranty.
Replacements and repairs performed
within this warranty, with or without
immobilization of the equipment, shall not
have the effect of extending the warranty
period. Replaced parts become the property
of LPG Systems or the approved distributor.
No compensation shall be paid for loss of use.
Subject to other conditions hereafter, warranty
shall apply if the purchaser/professional
user has allowed LPG Systems to proceed to
necessary repair works.
