9
Trolling motor Skimmer and Pod Installation
The TMB-S trolling motor bracket (Part No. 51-45) is an
optional
accessory and is available
through LEI Extras at
www.lei-extras.com
. The TMB-S bracket is used to attach a one-piece
bracket skimmer transducer to a trolling
motor.
The Pod transducer does not need a TMB-S
trolling motor bracket to be installed on a
trolling motor. It only needs a hose clamp
(adjustable strap).
Installing transducer on trolling motor:
Using the components supplied with the TMB-S bracket attach the skimmer
1.
transducer to the bracket as shown
in the diagram.
Slide the adjustable strap (hose
2.
clamp) through the plastic bracket
on the skimmer transducer or
through the Pod transducer slots
and then slip the strap around the
trolling motor.
Flat washer
Lock
nut
Bolt
Internal tooth
washer
Plastic bracket
Adjustable strap
Plastic ties (not
included)
Move transducer
cable to back
side of shaft
Installation
