Lowrance LMS-334c iGPS, Инструкция по установке и эксплуатации

Страница: 184 / 204

176
There are two options:
A.
You can spell out the name in the top selec-
tion box. Press
↑ ↓
to change the first letter, then press
→
to move the
cursor to the next letter and repeat until the name is correct, then
press
ENT
|
ENT
. B. Jump down to the lower selection list by pressing
ENT
, then press
↓ ↑
to select a street name from the list and press
ENT
.
The street name you selected is now in the street field.
The Finds Streets menu (left). The Find Street by Name menu (right).
4. To enter a city name, press
↓
to
C
ITY
|
ENT
. You will be asked if you
want to find streets only within a particular city. This option is de-
signed so you can limit an address search to a single city if necessary.
If you select yes, there are two options: A. You can spell out the city
name in the top selection box. Press
↑ ↓
to change the first letter, then
press
→
to move the cursor to the next letter and repeat until the name
is correct, then press
ENT
|
ENT
.
B.
Jump down to the lower selection list
by pressing
ENT
, then press
↓ ↑
to select a city name from the list, then
press
ENT
. The city name you selected is now in the city field.
NOTE:
We recommend you do not enter a city name unless the list you are
working with is too large when searching without a city. This unit
can actually search quicker when you do not enter a city.
Find Any Item Selected by Map Cursor
On the Map Page, with a POI or map feature selected by the cursor,
press
WPT
. The waypoint information window will appear with Go To
Waypoint highlighted.
NOTE:
Since Go To Waypoint is highlighted, you can navigate to the se-
lected POI by pressing
ENT
|
EXIT
.