Lowrance LMS-334c iGPS, Инструкция по установке и эксплуатации

Страница: 129 / 204

121
5. Begin moving and let your unit guide you.
6. When you reach your destination, cancel navigation: press
MENU
|
MENU
|
↓
to
C
ANCEL
N
AVIGATION
|
ENT
. A confirmation message will
appear. Press
←
|
ENT
.
Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2,
Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with
Navigate command highlighted for Trail 6. A trail is always converted
to a route when you navigate the trail.
On the Map Page, the trail you are navigating is represented by a dot-
ted line that alternates with a flashing solid line. The Navigation Page
will also show the navigated trail as a dotted line. The bearing arrow on
the compass rose points to the next waypoint on the trail.
As you travel, the arrival alarm will go off when you near a trail way-
point, and the bearing arrow on the compass rose will swing around
and point to the next trail waypoint. Press
EXIT
to clear the alarm.
Figure 3.
Figure 4.
Figure 1. Figure 2.