132
4. As you walk the perimeter of the area you're scouting, record a series
of flag points (using the flag waypoint symbol) that will be used to draw
the scout plot boundary. You need to set enough flag points to roughly
outline the area's corners. For example, while scouting a square soy-
bean field and looking for deer entry points, you could record the field
boundary by setting just four flag points.
To set the first flag point, press
ENT
and the new waypoint menu ap-
pears. Choose a point and press
ENT
. The New Waypoint Name box will
appear with Save Waypoint highlighted. Scroll
↑
to Add to Scout and
press
ENT
to uncheck it. Now, scroll down to
S
AVE
W
AYPOINT
and press
ENT
to create your first flag point. After the point is created, the scout
point menu is cleared. Back on the Map Page, the message Scout 1 ap-
pears in the lower right corner, indicating a scouting session is under
way.
5. Repeat these steps for setting a point at every major corner of the
area you're scouting. The iFINDER will link the flag points and draw
the perimeter of the area you walked.
Switch to Land Mode
To
leave Hunting Mode and switch to Land Mode:
1. Press
MENU
|
MENU
|
↓
to
D
ISABLE
H
UNTING
M
ODE
|
ENT
.
2. The following message appears: Are you sure you want to turn on
Land Navigation Mode?
3. Press
←
|
ENT
and the unit switches to Land Mode.
Switch Back to Hunting Mode from Land Mode
To leave Land Mode and switch back to Hunting Mode:
1. Press
MENU
|
MENU
|
↓
to
E
NABLE
H
UNTING
M
ODE
|
ENT
.
2. This message appears: Are you sure you want to turn on Hunting
Mode?
3. Press
←
|
ENT
and the unit switches to Hunting Mode.
Содержание iFINDER Hunt
Страница 1: ... Pub 988 0148 771 Handheld Color GPS Receiver Operation Instructions ...
Страница 148: ...140 Notes ...
Страница 149: ...141 Notes ...