Lowrance HDS Live, Руководство по установке

Страница: 37 / 70

All transducers measure water depth from the transducer to the
bottom. As a result, water depth readings do not account for the
distance from the transducer to the lowest point of the boat in the
water or from the transducer to the water surface.
A
B
• To show the depth from the lowest point of the vessel to the
bottom, set the offset equal to the vertical distance between the
transducer and the lowest part of the vessel,
A
(negative value).
• To show the depth from the water surface to the bottom, set the
offset equal to the vertical distance between the transducer and
the water surface,
B
(positive value)
• For depth below transducer, set the offset to 0.
Use temp data from
Selects from which source the temperature data is shared on the
NMEA 2000 network.
Installation
Use this dialog to setup and configure available sources.
Software setup | HDS Live Installation Manual
37