Lowrance Handheld Mapping GPS Receiver, Руководство по эксплуатации

Страница: 47 / 140

39
2. The Transfer My Data menu includes a message which tells you if an
MMC is present or not. If no MMC is present, you must first insert a
card into iFINDER in order to activate the Load or Save commands.
To transfer data from iFINDER to the MMC : press
ENT
(for
S
AVE
.)
To transfer data from the MMC to iFINDER : press
→
to
L
OAD
|
ENT
.
3. Saving : To accept the default name "Data" for the GPS Data File,
press
↓
to
S
AVE
|
ENT
. If you wish to rename the file (as in the example
below), press
ENT
to activate the selection box. Press
↑
or
↓
to change
the first character, then press
→
to the next character and repeat until
the name is correct. Then, press
ENT
|
↓
to
S
AVE
|
ENT
.
The unit will display first a progress then a completion message when
the data transfer is finished. To return to the Page view, press
EXIT
|
EXIT
.
From left to right, these figures show the menu sequence for naming
and saving a GPS Data File from an MMC into iFINDER's memory.
4. Loading : There may be more than one GPS Data File (*.USR) on the
card. To select a file, press
ENT
to activate the selection box, use
↓
or
↑
to highlight the file, then press
ENT
to accept the selection. Next, press
↓
to
L
OAD
|
ENT
. The unit will display a completion message when the
data transfer is finished. To return to the Page view, press
EXIT
|
EXIT
.
From left to right, these figures show the menu sequence for loading a
GPS Data File from an MMC into iFINDER's memory.