Lowrance ELITE Ti2, Руководство по установке

Страница: 26 / 56

Software setup
First time startup
When the unit is started for the first time, or after a factory default,
the unit displays a series of dialogs. Respond to the dialog prompts
to make fundamental settings.
You can perform further setup and later change settings using the
system settings dialogs.
Software setup sequence
1 General settings
- refer to
"System settings"
on page 27.
• Make general settings as desired
2 Advanced settings
- refer to
"Advanced"
on page 28.
• Enable or disable features
• Review the advanced setting options and make changes
as desired
3 Source selection
- refer to
"Network settings"
on page 37.
• Make sure that the proper external data sources have
been selected
4 Wireless settings
- refer to
"Wireless settings"
on page 36.
• Pair the Elite Ti² with another Elite Ti² to share data and
sonar sources.
5 Feature setup
• Configure specific features as described later in this
chapter
Turning the system on and off
The system is turned on by pressing the Power key.
Press and hold the Power key to turn the unit off.
You can also turn the unit off from the System Controls dialog.
If the Power key is released before the shut-down is completed, the
power off process is cancelled.
4
26
Software setup | ELITE Ti² Installation Manual