92
traveling in a straight line. Once you deviate from a straight line, the
unit "drops" a plot point (trail waypoint) onto the trail. This conserves
plot trail points. If a plot trail uses all of the available points allotted to
it, the beginning points are taken away and placed at the end of the trail.
Trail Options menu.
Press
↓
to
U
PDATE
C
RITERIA
|
ENT
|press
↓
or
↑
to select
criteria type
|
ENT
.
Trail Update Rate (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999 sec-
onds; the default is 3 seconds. You can update by distance, with a range
from 0.01 miles/nm/km to 9.99 miles/nm/km; the default is 0.10 miles.
With Update Criteria selected, press
↓
to either the rate or distance
data entry boxes and press
ENT
. Press
↑
or
↓
to change the first charac-
ter, then press
→
to the next character and repeat until the entry is
correct. Press
EXIT
|
EXIT
to return to the Trail Options Menu.
Trail Options menu.
Specific Trail Options
New Trail
To manually start a new trail or delete a trail: From the Trail Options
Menu, press
→
to
N
EW
T
RAIL
|
ENT
. The trail menu appears as seen below:
Содержание AirMap 500
