3
You can recharge the battery after every fishing trip, even if the bat-
tery was not fully discharged. This will always keep the unit ready for
your next fishing expedition. Disconnect the battery when stored for
long periods of time. You should also consider charging the battery once
a month while in storage. Your sonar's Ice Flasher page includes a bat-
tery gauge so you can monitor how much power you have remaining.
BATTERY INSTALLATION
1. Position the battery in the battery tray with the contacts pointed to-
ward the rear of the base plate, away from the mounting bracket.
Place battery into battery tray as shown.
2. Secure the battery in the tray with the Velcro straps.
3. Attach the power leads from the power/transducer cable to the bat-
tery contacts or terminals. Connect the red wire to the red or positive
terminal and connect the black wire to the black or negative terminal.
Battery shown connected to sonar unit's power leads.
4. Plug the cable's uniplug push-on connector into the socket on the
back of the sonar unit. See the following figure.
Battery
contacts
Red wire
Black wire
