7
Snap adjustment lock onto transducer mounting rod as shown, then
screw it into the swing arm's socket.
If you find the adjustment lock is too hard to turn, consider adding a small
amount of petroleum jelly or silicone lubricant to the adjustment lock's
threads. This will help the lock to turn more easily, which may be neces-
sary in very cold environments.
5. Slip the assembled transducer rod and swing arm into the ratcheted
swing arm socket on the front of the base plate.
Mount swing arm in ratcheted socket on base plate.
To adjust transducer depth, loosen the adjustment lock, slide the rod up or
down, then retighten. To adjust lateral position in your fishing hole, simply
nudge the arm to one side or another, then lightly press down on the arm's
ratchet end to engage the ratchets. See the following figure.
