Lovibond SensoDirect Con200, Руководство по эксплуатации

Страница: 18 / 24

18
Err.2 Below Check: can value be
measuring range below admissible
measuring range?
-> Result too low!
Sensor/ Electrode Send in for repair
defective
Display Cause Remedy
Err.7 System error Send in for repair
Err.11
Value could not be Temperature outside
calculated the admissible
temperature
measuring range
Calibration
Display Cause Remedy
CAL.-Err.1 Value was inad- Clean electrode,
missible, cell re-calibrate
constant too high: If error repeated
electrode defective -> replace electrode
Buffer solution Use fresh buffer
unusable solution
CAL.-Err.2 Value was Replace electrode
inadmissible, cell
constant too low:
electrode defective
Buffer solution Use fresh buffer
unusable solution
CAL.-Err.4 Wrong temperature Calibration only
during calibration possible in range
from 10 … 40°C