Loveshaw LITTLE DAVID CF5, Руководство пользователя

Страница: 16 / 37

LOVESHAW
TROUBLESHOOTING GUIDE
A. DURING FOLDING OR FILLING CYCLE, 1. CHECK TO SEE IF WIDTH ADJUSTMENT IS CORRECT.
BOX RELEASES, ALL FLAPS DROP. IF IT IS TOO WIDE, THE PHOTO EYE THAT
CONTACTS
THE SIDE OF THE BOX WILL RESET AND CAUSE
THE MACHINE TO RETURN TO THE START POSITION.
2. SHAKING THE BOX TO LEVEL THE CONTENTS CAN
CAUSE THE PHOTO EYE TO RESET.
B. MAJOR FLAPS HAVE PROBLEMS FOLDING 1. MAKE SURE THE MAJOR FLAP OPENERS ARE
AND CAUSE INNER EDGES OF MINOR FLAPS SET CORRECTLY SO THEY TEMPORARILY
TO BE FOLDED OVER. OPEN THE MAJOR FLAPS WIDER AND ALLOW
THE MINOR FLAPS TO CLEAR THE INSIDE OF
THE MAJOR FLAPS BEFORE RELEASING.
2. CHECK THAT AIR PRESSURE IS ADEQUATE AND
THAT AIR PRESSURE DOES NOT DROP DURING
THE CYCLE.
C. DURING MINOR FLAP FOLDING, BACK 1. BE SURE THAT THE BOX WIDTH SETTING DOES
OR FRONT OF BOX COLLAPSES INWARD. NOT HOLD BOX TOO TIGHTLY.
2. CHECK THE AIR PRESSURE SETTING.
3. CHECK THAT THE SCORING ON THE BOX IS
ADEQUATE AND PROMOTES FOLDING.
D. BOX TRANSFER FROM CF5 1. CHECK THE HEIGHT OF THE ROLLERS AT
INTO CASE SEALER IS THE OUTFEED END OF THE CF5 AND THAT
NOT SMOOTH. THE BOX CLEARS THE MACHINE FRAME.
2. CHECK THE ALIGNMENT OF THE MACHINES
TO EACH OTHER. MAKE SURE THE WORKING
SURFACE (HEIGHT) OF BOTH MACHINES ARE
CO-PLANAR.