Loveshaw LITTLE DAVID CF5, Руководство пользователя

Страница: 5 / 37

LOVESHAW
INSTALLATION PROCEDURE
EXERCISE CARE WHEN HANDLING THIS MACHINE, A SUDDEN JOLT OR JAR MAY CAUSE SERIOUS DAMAGE.
DO NOT REMOVE THE SHIPPING SKID UNTIL MACHINE HAS BEEN MOVED TO A POINT OF INSTALLATION.
THE SKID IS DESIGNED FOR EASY AND SAFE HANDLING OF YOUR MACHINE. UNPACK MACHINE AND REMOVE
ANY MATERIALS USED TO PROTECT COMPONENTS DURING SHIPPING.
IF MACHINE IS PLACED DIRECTLY ON FLOOR, FRAME BASE MUST BE LEVEL TO ENSURE PERSONAL SAFETY,
PREVENT UNDO STRESS TO THE FRAME, AND MAXIMUM PERFORMANCE.
THE CF5 IS INTENDED TO OPERATE IN A HORIZONTAL POSITION. DO NOT ATTEMPT TO TILT THE CF5 TOWARD
THE OPERATOR, THIS WILL CAUSE EXCESSIVE WEAR ON THE BOX WIDTH ADJUSTMENT ASSEMBLY AND MAY
CAUSE IT TO JAM OR EVEN DAMAGE THE WIDTH ADJUSTMENT SCREW.
THE CF5 SHOULD BE SECURELY MOUNTED IN-LINE WITH ADJOINING EQUIPMENT TO PREVENT IT FROM MOVING
AS IT OPERATES.
AIR SUPPLY MAY COME FROM EITHER A SEPARATE SOURCE OR BY TAPPING OFF THE SUPPLY OF AN ADJOINING
CASE SEALER. THE AIR SUPPLY TO THE MACHINE SHOULD BE CLEAN AND DRY, AS THE FILTER IS ONLY MEANT
TO REMOVE MINOR PARTICLES OR SLIGHT AMOUNTS OF MOISTURE IN THE AIR LINE. DIRT OR MOISTURE CAN
CAUSE THE ERRATIC OPERATION OF CONTROL VALVES.
AIR SHOULD BE SET AT 50 PSI, WITH A MINIMUM OF 40 PSI AND A MAXIMUM OF 60 PSI.