12
Immunity time for microbreakings
≤
200 ms with Us 240 VAC
≤
50 ms with Us 100 VAC
Rated insulation voltage Ui
250 V~
Overvoltage category
II
Insulation
Test type Uimp AC 50 Hz
4.8 kV 2 kV
Number of inputs
4
Input type
Positive (PNP)
Voltage present on inputs
12 V= isolated
Input current
7 mA
Low input signal (ON)
≤
1.5 V (2.9 V typical)
High input signal (OFF)
≥
5.3 V (4.3 V typical)
Rated insulation voltage Ui
12 V=
Ambient conditions
Operating temperature
-20 - +60 °C
Storage temperature
-30 - +80 °C
Relative humidity
<80% (IEC/EN 60068-2-78)
Maximum degree of ambient pollution
2
Altitude
≤
2000 m
Input type
Three-phase + neutral
Max. rated voltage Ue
400 V~ phase-to-phase 230 V~ phase-to-neutral
Measuring range
20 – 480 V~ phase-to-phase
10 – 276 V~ phase-to-neutral
Rated frequency
50 Hz
Frequency range
45 – 55 Hz
Measurement type
True root mean square (TRMS)
Connection method
Three-phase with or without neutral
Rated insulation voltage Ui
400 V~
Overvoltage category
IV
Insulation
Test type Uimp
AC 50 Hz
7.3 kV
2 kV
Ammeter inputs (optional)
Rated current Ie
1 A~ or 5 A~
Measuring range
for 5 A scale: 0.010 - 6 A ~ for 1 A
scale: 0.010 – 1.2 A~
Input type
Shunt supplied by an external current transformer (low
voltage) 5 A max.
Measurement type
Root mean square (RMS)
Overload capacity
+20% In
Overload peak
50 A for 1 second
Burden (per phase)
0.6 W
Accuracy
Measuring conditions
Temperature
+23 °C ± 2 °C
Phase voltage
±0.2% (160…480 V~) ±0.5 digit
±0.5% (50…160 V~) ±0.5 digit
Phase-to-phase voltages
±0.2% (277…830 V~) ±0.5 digit
±0.5% (80…277 V~) ±0.5 digit
Current
±0.2% (0.1…1,2 In) ±0.5 digit
Active energy
Class 0.5s (IEC/EN 62053-22)
Temperature
0.03%/°K per V, A, W
Terminal type
Screw-type (fixed)
No. of terminals
2 + 4 for supply
4 for voltage measurement
Cable cross section (min. & max.)
0.2 - 4.0 mm
2
(24 - 12 AWG)
Tightening torque
0.8 Nm (7 lbin)
Terminal type
Screw-type (fixed)
No. of terminals
6
Cable cross section (min. & max.)
0.2 - 2.5 mm
2
(24 - 12 AWG)
Tightening torque
0.44 Nm (4 lbin)
Terminal type
Screw-type (fixed)
No. of terminals
6
Cable cross section (min. & max.)
0.2 - 2.5 mm
2
(24 - 12 AWG)
Tightening torque
0.44 Nm (4 lbin)
Isolation between the 2 relay outputs
Screw-type (fixed)
Digital input connection
Terminal type
Screw-type (removable)
No. of terminals
5
Cable cross section (min. & max.)
0.2...2.5 mm
2
(24 - 12 AWG)
Tightening torque
0.5 Nm (4.5 LBin)
Housing
Version
6 modules (DIN 43880)
Fitting
35 mm rail (IEC/EN60715) or screw-type by means of clips
removable
Material Polyamide
RAL
7035
Degree of protection
IP40 front
IP20 housing and terminals
Weight
580 g
Compliance with standards
SHAMS DUBAI - DRRG
STANDARDS VERSION 2.0
❶
Single insulation between the relays. Both the relay outputs must be used with the same voltage source.
Number of outputs
2
❶
Output type
1 switching contact
Rated operating voltage
250 V~
IEC/EN 60947-5-1 designation
C300 /
NO contact AC1 5 A 250 V~ - 5 A 30 V=
NC contact AC1 2 A 250 V~ - 2 A 30 V=
Electrical endurance
NO contact 2x10
4
operations
NC contact 10
4
operations
Mechanical life
10
7
operations
Overvoltage category
II
Insulation
Test type Uimp
AC 50 Hz
4.8 kV
2 kV
Relay outputs
Certifications and compliance
Current measurement circuit connections
Reactive energy
AIStional errors
Class 2 (IEC/EN 62053-23)
Voltmeter inputs
Digital inputs
Voltage measurement/power supply circuit connections
Relay output connection
CLASS 1 LED PRODUCT
INVISIBLE LED RADIATION
I48
6
GB
09
16
31
10
02
98
TECHNICAL SPECIFICATIONS
Auxiliary supply
Rated voltage Us
100 - 240 V~
110 - 250 V=
Operating range
85 - 264 V~
93.5 - 300 V=
Frequency
45 - 55 Hz
Power consumption/dissipation
Us 110 V~
Us 230 V~
Us 110 V=
Us 250 V=
