19
Sound Signal/Chimes During Weaving
You can enable sound chime at certain times during weaving, for example, to change
color. It is advisable to only enable one of the signal groups.
The sound is produced by the device on which the web interface is operating. So,
make sure the speakers are turned on. On all Apple products, it is unfortunately not
possible to produce sound signals (Apple has disabled this functionality).
Set Sound signal
The following settings can be switched on
or off:
•
Sound signal when the last pick of
the weaving pattern is reached
•
Sound signal always after 16 picks
•
Sound signal of choice for each
color change in the color bar of the
pattern or a color change to a
specific color.
1.
open settings
1.
Select one or more of the signal
options
1.
Click the options you
want to switch to
2.
close settings
Unweave
When starting a new weaving session (when opening an existing or new weaving
file), the weaving history is still empty. As soon as you weave, the lines under the
active weaving area are filled with the history. The last 1000 woven picks are
retained. Once the Dobby is turned off or another pattern is loaded, the history is
emptied again.
When you switch to the
Unweave
function, the history is rewoven with every treadle
movement. In the example below, first tabby B, then pattern 5, then tabby A, then
pattern 4. After disabling the
Unweave
function, the same pick as the last extracted
entry will be active. Set the last pick to pick 4, then after turning it off again the active
pick that follows (in the forward weaving direction) is pick 5.
