14
Operating Instructions for
LTS 138 / 150 SAC
A
ll data is without guarantee, errors and changes are reserved
.
LOTUS TRANSFER PRESS SOLUTIONS GmbH & Co. KG
10.
Maintenance
Following the safety directions mentioned below is essential to avoid severe injuries
to the operator and/or damage to the transfer press.
Before performing any mainte-
nance work, the transfer press must have been switched off and the plug must have been
removed from the power socket.
Note the high temperatures of the top heating plate. It can take up to 15 minutes until the
plate has cooled down to a temperature below 50° C.
Carefully follow the instructions mentioned in this manual before performing any mainte-
nance or cleaning work on the transfer press.
Maintenance work must only be performed by skilled and specially trained staff.
Before switching on the unit again after maintenance or cleaning work, ensure that no tools
or spare parts have been left in or on the unit and that shrouds, safety appliances, graphic
symbols and instructions attached to the press are in good condition and easy to read.
11.
Dismantling and Disposal of the Transfer Press
All work for dismantling or disposal must be performed by sufficiently qualified
staff.
A transfer press is an industrial unit. All applicable laws must be followed concerning the
disposal of industrial machinery in the country of the user.
Disconnect the unit from the power supply and dismantle it. Sort the parts according to
their composition, e.g. aluminum, plastic, steel, mineral wool etc. The disposal of these ma-
terial groups must be performed in accordance to the applicable laws in the country of the
user.
Strictly follow the safety instructions mentioned in this manual when dismantling the press.