Lotus ILMAS10, Инструкция по эксплуатации

Страница: 9 / 23

ILMAS10 ILMAS10
16
17
2. When the crown is pulled out to Position 2 (time setting position), the second
hand rapidly advances to the 0 seconds position and stops.
Note: When the second hand does not stop at the 0 seconds position, reset the
base position in the “0-Position Correction Mode”.
3. Click (turn) the crown to set the time.
(1) Clicking the crown once to the right causes the 24 hour hand, hour hand and
minute hand to move in the clockwise direction.
(2) Clicking the crown once to the left causes the 24 hour hand, hour hand and
minute hand to move in the counter-clockwise direction.
• Turning the crown rapidly (continuously clicking two or more times) causes the
hands to advance rapidly. When stopping the hands, click the crown once to the
right or left. When the hands are not stopped manually, they stop automatically
after being corrected by 12 hours.
4. Return the crown to the normal position in synchronization with a telephone time
signal or other time service.
1. [Setting the Date]
As a result of being equipped with an auto calendar function, it is not
necessary to correct the date at the end of each month. However, since the
watch uses 28 days for the month of February, it is necessary to correct the
date at the end of February, but only in leap years.