Lotus ILMAS10, Инструкция по эксплуатации

Страница: 7 / 23

ILMAS10 ILMAS10
12
13
0 Positions of each Hand (Base Positions)
24 hour hand: 24:00
Hour hand, minute hand: 00:00
Second hand: 00 seconds
Function hand: 0 position (12:00 position)
Date wheel: 1st
Perform the “0-Position Correction” when
the hands and date wheel are not at the
positions indicated above.
1. Pull the crown out to Position 1 in the chronograph [CHR] mode to correct
the function hand and date wheel.
2. Click (turn) the crown to the left to align the date wheel.
The 12:00 position immediately after the date changes to the “1st” is the 0
position of the function hand. After correcting the date wheel to the “31st” by
turning the crown, press button (A) to finely correct the function hand so that the
function hand is aligned at the 0 position after the date wheel changes to the “1st”.
(1) Clicking the crown once causes the function hand to make four
revolutions and the date to be corrected by one day.
(2) Turning the crown rapidly (clicking continuously two or more times)
causes the function hand to advance continuously.
When stopping the function hand, click the crown once to the right or left. When
the function hand is not stopped manually, it stops automatically after advancing
31 days
0-Position Correction of Function Hand and Date Wheel
[0. Position Correction]