oh48e
typically 2/3 to 3/4 of a turn after the sealing faces have made
contact. Overtightening using a filter wrench may damage the
canister and/or complicate subsequent removal.
Before refitting the undertray, start the engine and check for
oil leaks. Re-check the security of the filter, further tightening
by hand if necessary. Check the oil level (see above) when the
engine is fully warm.
Used Engine Oil
NOTICE:
PROTECT THE ENVIRONMENT: Do not pollute drains,
water courses or land with oil. Use only authorised waste collec-
tion facilities, including civic amenity sites and garages providing
facilities for disposal of used oil and used oil filters. If in doubt,
contact your local authority for advice on disposal.
Transmission Oil
The transmission should be checked for oil leaks, for the
correct oil level, and the oil renewed, at intervals specified in the
Maintenance Schedule.
To check the oil level:
- A garage lift or inspection pit must be used.
- Remove the engine bay undertray.
- Wipe clean the area around the socket headed level plug on
the front face of the transmission end casing.
- Remove the plug, and check that the oil is level with the
bottom of the hole. Note that the release of oil trapped
by the plug, should not be confused with an indication of
S
e
r
v
ic
in
g & M
a
in
te
n
a
n
c
e
107
oh_USA EliseExige E121.indd 109
15/03/2010 15:08:11
