Air Cleaner Element
The air filter should be inspected at intervals dependent on
the operating conditions. When the car is operated in a relatively
clean environment, the element should be renewed at intervals
specified in the Maintenance Schedule, but where a dusty or
smog laden atmosphere prevails, or other factors contribute to
filter contamination, more frequent replacement will be required
dependent on the level of pollution.
A disposable folded paper type air cleaner element is fitted
in a housing at the left hand front of the engine bay. For access
to the element, the left hand rear wheel and wheelarch liner
must first be removed so this operation is best entrusted to your
dealer. Before opening the air cleaner housing, the wheelarch
area should be cleaned to reduce the possibility of filter or hous-
ing contamination with road dirt.
To open the filter housing, release the two spring clips at the
outboard end of the housing, and hinge open sufficiently to allow
the element to be removed. If necessary, remove the air intake
scroll for improved access.
Clean the inside of the housing, including the joint faces,
taking care not to contaminate the ‘clean’ engine side of the as-
sembly. Fit the new filter element into position with the shallow
side towards the engine, and taking care to ensure that the two
hinges of the filter housing are properly mated, and that the filter
is seated correctly, close the housing and secure with the two
spring clips. Refit the wheelarch liner and rear wheel.
ohs146
AIR CLEANER ELEMENT
S
e
r
v
ic
in
g & M
a
in
te
n
a
n
c
e
117
oh_USA EliseExige E121.indd 119
15/03/2010 15:08:12