©Copyright LOTRONIC 2018
BEE40-LED
Page 16
3-PIN AUF 5-PIN UMSETZTABELLE
Hinweis! Wenn Sie ein Steuerpult mit 5-pol. DMX Ausgangsverbinder benutzen, müssen Sie einen 5- auf 3-pol.
Adapter benutzen.
In der nachstehenden Tabelle steht die richtige Kabelumsetzung:
Leiter
3 Pin Buchse (Ausgang)
5 Pin Stecker (Eingang)
Masse/Abschirmung
Pin 1
Pin1
Datensignal (-)
Pin 2
Pin 2
Datensignal (+)
Pin 3
Pin 3
Nicht benutzen
Nicht benutzen
Nicht benutzen
Nicht benutzen
Einrichten einer seriellen DMX Datenverbindung
1. Den 3-pol. Stecker des DMX Kabels in die 3-pol. Eingangsbuchse des Controllers stecken.
2. Das vom Controller kommende Kabel mit der 3-pol. Buchse an den 3-pol. Eingangsstecker des folgenden Geräts
stecken.
3. Dann den Ausgang des Geräts an den Eingang des folgenden Geräts anschließen usw.
Display Menü
1 Addr DMX Address
001-512
2 ChNd DMX Mode
.=CH4
.=CH16
3 SPNd Speed Mode
.=High
.=Low
4 SLNd Run Mode
.=Master
.=Slave
5 SHNd Internal Program
.=001
.=002
.=003
.=004
.=005
.=006
.=007
.=008
6 Soun Sound Control
.=OFF
.=ON
7 PAN X Reverse
.=OFF
.=ON
8 TIL
Y Reverse
.=OFF
.=ON
9 dISP Display Reverse
.=OFF
.=ON
10 rFAC Reset Default
.=OFF
.=ON
11 Ad t
Home Position
Setting
Delt
Clear Pan and Tilt Home Position(3s)
P(PAN)
.=0-120
t(TILT)
.=0-120
C(Color) .=0-120