Lotos Technology LTP5500D, Руководство пользователя

Страница: 23 / 31

20 / 28
❖
STARTING A CUT
1.
Hold the torch 90° to the edge of the work piece.
2.
Press the trigger of the torch to start the pilot arc. Hold the torch at the edge (Do not continue
the cut) until the arc has cut completely through the work piece.
3.
Drag the torch across the work piece to proceed with the cut smoothly. Maintain a steady,
even pace. Make sure the arc cuts completely through the work piece.
✓ When cutting make sure that sparks are exiting from the bottom of the work piece.
✓ If sparks are spraying up from the work piece, you are moving the torch too fast, or you
don’t have enough amps set.
✓ Hold the torch vertical and watch the arc as it cuts along the line.