APPENDIX #3 – CONNECTION to a LOREX
TIME LAPSE VCR FOR ALARM RECORDING
12
OUT
QUAD
VCR
IN
OUT
MONITOR
ALARM
Wires being run from the Time Lapse VCR’s or DVR’s alarm input terminal must be soldered to the
appropriate terminal of the 9 Pin Alarm Connector.
In addition to connecting up to 4 PIR Motion Sensors, connect the 9 Pin Alarm Connector to a security recorder
such as the Lorex Time Lapse VCR shown below for Alarm Recording upon motion detection.
For descriptions of each contact on the 9 Pin Connector of the Quad Processor, please refer to Appendix #4.
4 5
